Hach POLYMETRON 8811 Manuel D'utilisation De Base page 25

Enter the password with the SCROLL UP/DOWN keys and SELECT. SCROLL UP/DOWN enable to
choose the sub-menus.
Press ENTER.
ANALYZER TYPE menu
PMXXXX
ANALYZER TYPE
Press ENTER.
ANALYZER TYPE
DISCONTINUOUS
Press ENTER.
SCROLL UP/DOWN to choose the number of measures by channel
ANALYZER TYPE
ONE MEASURE
or
ANALYZER TYPE
TWO MEASURES
DATA TO RS232 menu
This menu enables to send the last 100 measurements to the RS232 under the following format:
CH X/Z
number of the channel
and number of the
measurement
PM XXXX
DATA TO RS232
Press ENTER.
DATA TRANSFER
PLEASE WAIT
This message is displayed for about one minute.
ADJUST IOUT menu
PM XXXX
ADJUST IOUT
Press ENTER.
ADJUST IOUT
OUT: x - 20mA
For the discontinuous analyzers
For one measure by channel
For two measures by channel
XX.XXE±XXX XX.X
concentration temperature
value value
The 8811 sends the last 100 measurements.
Choice between 0 - 20mA or 4 - 20mA.
Choice of the analyzer
XXXX
direct
measurement
value
Data sending.
Output calibration.
XX:XX:XX
time of the measurement
(00:00:00 when starting
the sequencer)
English 25