Publicité
38
6.5
GLOWING EMBER PLACEMENT
Tear the embers into pieces and place on top of the front burner area be-
tween the middle log and charcoal strip. Care should be taken to shred the
EN
embers into thin, small irregular pieces as only the exposed edges of the
fi bre hairs will glow. The ember material will only glow when exposed
to direct fl ame; however, care should be taken to not block the burner
ports.
Blocked burner ports can cause an incorrect fl ame pattern, carbon deposits
and delayed ignition. PHAZER
Use only certifi ed "glowing embers" and PHAZER
your Authorized dealer.
6.6
CHARCOAL EMBERS
Randomly place the charcoal embers along the front and sides of the log support tray in a realistic manner.
Fine dust found in the bottom of the bag should not be used.
NOTE: Charcoal embers are not to be placed on the burner.
6.7
OPTIONAL VERMICULITE
Sprinkle vermiculite around the charcoal embers.
NOTE: Vermiculite is not to be placed on the burner.
6.10 LAVA ROCK
Lava rock should be spread out evenly around the burner on the fi rebox base.
NOTE: Lava rock is not to be placed on the burner.
6.8
OPTIONAL CHARCOAL LUMPS (STANDARD ON HD46)
CHARCOAL EMBERS, VERMICULITE AND CHARCOAL LUMPS ARE NOT TO BE PLACED ON THE
Place the lumps in front of the logs in a realistic manner taking care not to block any of the burner ports.
6.9
LOGO PLACEMENT
Remove the backing of the logo supplied and place on the glass viewing door or bottom access panel as
illustrated.
W415-1347 / A / 03.19.15-
All manuals and user guides at all-guides.com
logs glow when exposed to direct fl ame.
TM
TM
logs available from
WARNING
!
BURNER.
1/2" 13mm
LOGO
#4 GLOWING EMBERS
#4 GLOWING EMBERS
32.1
33.1
34.1
1/2" 13mm
Publicité
