Publicité
36
6.4
LOG PLACEMENT
EN
FAILURE TO POSITION THE LOGS IN ACCORDANCE WITH THESE DIAGRAMS OR FAILURE TO USE
ONLY LOGS SPECIFICALLY APPROVED WITH THIS APPLIANCE MAY RESULT IN PROPERTY
LOGS MUST BE PLACED IN THEIR EXACT LOCATION IN THE APPLIANCE. DO NOT MODIFY THE
PROPER LOG POSITIONS, SINCE APPLIANCE MAY NOT FUNCTION PROPERLY AND DELAYED
The individual logs can be easily identifi ed by the numbers cast on the underside of each log.
Phazer
TM
logs and glowing embers exclusive to Wolf Steel Ltd., provide a unique and realistic glowing effect
that is different in every installation. Take the time to carefully position the glowing embers for a maximum
glowing effect. During the initial use of the appliance, log colours may vary. During the initial use of the appli-
ance the colours will become more uniform as colour pigments burn in during the heat activated curing pro-
cess.
LOGS
Rear Log
Middle Log
Left Log
Right Log
Charcoal Strip Log
Base Left Log
Base Right Log
Place the rear log (W135-0339) on rear bracket, ensure the log is
A.
seated properly on the rear bracket and located on the center pin.
Place the middle log (W135-0409) on top of the burner pan. Use
B.
the two bottom holes of the log to locate it onto the two pins on the
burner pan.
HD35/40: Place the log charcoal strip (W135-0408) on top of
C.
the front grate by engaging the two cut out notches onto the two
middle posts of the front grate.
HD46: Place the log charcoal strip (W135-0408) on top of the sup-
port ember strip.
W415-1347 / A / 03.19.15-
All manuals and user guides at all-guides.com
DAMAGE OR PERSONAL INJURY.
IGNITION MAY OCCUR.
THE LOGS ARE FRAGILE AND SHOULD BE HANDLED WITH CARE.
LOG IDENTIFICATION CHART
HD35
HD40
W135-0339
W135-0339
W135-0409
W135-0409
W135-0406
W135-0406
W135-0407
W135-0407
W135-0408
W135-0408
N/A
N/A
N/A
N/A
WARNING
!
HD46
W135-0339
W135-0409
W135-0406
W135-0407
W135-0408
W135-0392
W135-0393
76.1A
Publicité
