Installing The Overlay Frame - Thermador T24UW820LS Guide D'installation

Installing the overlay frame

(For T24UW800LP and T24UW800RP models only)
If you plan to install a custom overlay frame, you will need to create the frame yourself or consult a
qualified cabinetmaker or carpenter.
For detailed dimensions, see the frame specifications in Addendum A.
IMPORTANT:
- The thickness of the overlay frame must be ¾" (19mm).
- Overlay frame must not weight more than 10lbs (4.54kg).
- Overlay frame weighting more than recommended may cause damage to your appliance.
- To install the frame, use only the screws included in the "installation kit".
Create the custom overlay frame using the dimensions shown.
IMPORTANT: The following graphics shows a custom frame for a door with hinges installed on the right-
hand side. If your Wine Reserve has hinges installed on the left-hand side, rotate the custom frame 180°
so the makings will be on the left.
For detailed dimensions, see the frame specifications in Addendum A.
IMPORTANT: It is recommended to install the custom overlay frame with the help of another person.
Page | 16