Introduction; Important; Inspect The Wine Reserve - Thermador T24UW820LS Guide D'installation

Introduction

These installation instructions are intended for use by qualified installers.
In addition to these instructions, the appliance shall be installed:
In the United States, in accordance with the
National Electric Code/State and municipal
codes and/or local codes.
In Canada, in accordance with the Canadian
Electric Code C22.1 – latest edition/Provincial
and Municipal codes and/or local codes.
Please read these installation instructions completely and carefully.
They will save you time and effort and help to ensure optimum performance.
Be sure to observe all listed warnings and cautions.
Look for the triangles with exclamation marks inside.
WARNING:
This indicates that death or serious
injury may result due to non-observance
of this warning.
CAUTION:
This indicates that minor or moderately
severe injury may result due to non-
observance of this warning.

Important

NEW INSTALLATION – If the appliance is a new installation, most of the work must be
done before the unit is moved into place.
REPLACEMENT – If the appliance is replacing another appliance, the connections for
the appliance being replaced must be checked for compatibility with the new unit and
replaced as necessary.

Inspect the Wine Reserve

Remove all tape, packaging and plastic covers.
After unpacking the appliance and prior to installation, thoroughly inspect the Wine Reserve for possible
freight or cosmetic damage. Report any damage immediately.
NOTE: Please do not discard any bags or items that come with the original package until after the entire
installation has been completed!
Page | 3