Installing The Overlay Frame - Thermador T24UW925LS Guide D'installation

Installing the overlay frame

(For T24UW905LP and T24UW905RP
If you plan to install a custom overlay frame, you will need to create the frame yourself or consult a
qualified cabinetmaker or carpenter.
A full sized template for easier hole pattern marking is included in the manual package.
IMPORTANT:
- The thickness of the overlay frame must be ¾" (19mm).
- Overlay frame must not weigh more than 10lbs (4.54kg).
- Overlay frame weighing more than recommended may cause damage to your appliance.
- To install the frame, use only the screws included in the "installation kit".
Create the custom overlay frame using the dimensions shown.
IMPORTANT: The following graphics shows a custom frame for a door with hinges installed on the right-
hand side. If your Wine Reserve has hinges installed on the left-hand side, rotate the custom frame 180°
so the makings will be on the left.
For detailed dimensions, see the frame specifications in Addendum A.
models only)
Page | 17