Tools Needed For Installation; Materials Supplied - Thermador T24UW820LS Guide D'installation

Tools needed for installation

Tape Measure Philips Screwdriver Level
These are the tools that you may need for the installation of the appliance. However, if you need to
modify the counter or cabinetry to fit the unit, you may need other tools to make counter/cabinetry
modifications before installing the appliance.

Materials supplied

Anti-tip-bracket. 2 pieces. Screws for Overlay Panel: ST1TYA131SF
Screws: 2 pieces. (TRUSS M4X34 TAPPING). 8 pieces.
Door Stopper Pin: 2
ONLY FOR T24UW800LP MODELS.
1 Insulating Foam
(Not illustrated)
20 1/2"
(520mm) x 29 1/8" (740mm)
x 1/8" (3mm)
Page | 4