Installing The Appliance; Transporting; General Measures; Installation Location - Thermador T24UW820LS Guide D'installation

Masquer les pouces Voir aussi pour T24UW820LS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installing the appliance

Most of the installation work must be done before the Wine Reserve is moved into place.
Have a technician install and connect the appliance according to the enclosed installation instructions.
WARNING:
Do not install this appliance:
- Outdoors
- In an environment with dripping water
- In rooms where there is a risk of frost

Transporting

The appliance is heavy and must be handled with caution during transportation and installation.
Because of the weight and dimensions of the appliance, at least two persons are necessary to move the
appliance into position securely and avoid injuries to people or damage to the appliance.

General measures

Installation location

A dry, well ventilated room is suitable as an installation location. The installation location should not be
exposed to direct sunlight and not placed near a heat source, e.g. a cooker, radiator, etc.
If installation next to a heat source is unavoidable, use a suitable insulating plate or observe the following
minimum distance from the heat source:
To electric or gas oven/range 1¼" (3 cm).
To an oil or coal-fired cooker 11
To another Wine Reserve or Refrigerator 1" (2.54cm).
The floor of the installation location must not give way; if necessary, reinforce floor. The appliance must
be upright to function correctly.
/
" (30cm).
13
16
Page | 5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

T24uw810lsT24uw820rsT24uw810rsT24uw800lpT24uw800rp

Table des Matières