Publicité
INTRODUCTION
General
To ensure optimum and safe operation of your fireplace, we recommend that you
that it be installed by a specialist who will carry out the work properly.
the work to the highest standards.
JIDÉ is responsible for supplying the appliance. Installation is the responsibility of
responsibility of the owner, who must ensure that it is installed in accordance with the
instructions
of this manual and in accordance with the regulations and standards in force in the various
countries
regulations and standards in force in the various countries governing the installation,
insulation and connection of closed fireplaces,
wood-burning closed fireplaces in new or old buildings, as well as flues.
flues. The appliance must not be modified, otherwise it may represent a real danger and result
in
of the warranty.
A list of our installer dealers is available on our website www.jide.be.
Before using your fireplace for the first time, and in order to ensure that it is used correctly and
will last
over time, we suggest that you read these instructions carefully to familiarise yourself with
to familiarise yourself with its various functions and features.
Before starting your first fire, please make sure that no material required by the
installation is in the fireplace.
The paint is not baked on and will therefore harden on first use, causing smoke and odours to
be released.
causing smoke and odours to be released. We advise you to start with a very
and then air the room well.
The Pure V3 Compact range includes the following models:
- PURE 53/51 V3 C
- PURE 58/47 V3 C
- PURE 67/51 V3 C
- PURE 77/51 V3 C
Technical characteristics and compliance
Combining ecology and economy, JIDÉ has created the PURE range, which has two
combustion air inlets.
an external combustion air intake (sealed appliance) (ideal situation) or a combustion air
intake
(ideal situation) or a combustion air intake directly into the room where it is
installed.
The primary air is distributed under the fire bed via stainless steel ducts.
The secondary air creates an afterburner by re-burning the gases.
efficiency.
The preheated tertiary air has a 'turbo' effect, sweeping the glass from top to bottom to keep it
clean.
and also contributes to combustion.
Ecological solution: Cleaner emissions, less dust and less CO.
Economical solution: much lower wood consumption.
JIDÉ subjects its ranges of inserts to tests in accredited laboratories to ensure that they
meet the requirements of European EN standards in terms of safety and efficiency, limiting
efficiency by limiting the emission of CO and fine particles.
Test results according to standards
EN 13229:2001 - EN 13229/A1:2003 - EN 13229/A2:2004
Spare parts - Rating plate
In addition to the fireplace, the package contains the following items:
- A poker - cold hand
- A glove
- A blanking plate and fixing screws (to close the rear air intake if connecting from below).
connection from below).
All JIDÉ fireplaces are listed as soon as they leave the factory, according to the indications
on the rating plate at the back of the appliance. A duplicate
is included with these instructions, giving the appliance's power, efficiency and CO
CO emissions.
This plate should be kept and, if necessary, will enable us to identify your appliance in our files
(traceability).
our files (traceability).
39
Publicité
