Publicité
16 Troubleshooting
► If the charger is defective or damaged:
Replace the charger.
► If the connecting cable has a malfunction or is
damaged: Do not use the charger and have
16 Troubleshooting
16.1
Troubleshooting the compressor or battery
Error
Display on the
compressor
Compressor
1 Light bar fla‐
does not operate
shes green.
after it is swit‐
(The lamp
ched on, or it
function may
suddenly stops
still be avai‐
working.
lable.)
b-L and 1 light
bar flashes
green.
bcL
bcH
A-H
The power output
1 Light bar fla‐
of the compres‐
shes green.
sor is diminished
(The lamp
or insufficient.
function may
still be avai‐
lable.)
Compressor run‐
time is too short.
0458-057-9601-A
the connecting cable replaced by a STIHL
servicing dealer.
Cause
The state of charge of
the battery is too low.
The state of charge of
the battery is too low
or the battery is dee‐
ply discharged.
Battery is too cold.
The battery is too
warm.
The motor current is
too high.
No electrical contact
between the compres‐
sor and the battery.
The compressor or
battery is damp.
The state of charge of
the battery is too low.
Adapter/ball needle
and hose are incor‐
rectly fitted.
Air escapes from the
product or attachment
parts to be pumped
up.
The battery is not fully
charged.
The battery service
life has been excee‐
ded.
Remedy
► Charge the battery.
► Try to charge the battery.
► If this step cannot be carried out: Do not
use the battery anymore and contact a
STIHL authorized dealer.
► Remove the battery.
► Allow battery to warm up.
► Remove the battery.
► Wait for the battery to cool down.
► Remove the battery and put it back in.
► Switch on the compressor.
► If the error continues to be shown: Do not
use the compressor and consult a STIHL
authorized dealer.
► Remove the battery.
► Clean the electrical contacts in the bat‐
tery compartment.
► Insert the battery.
► Allow the compressor or battery to dry,
17.6.
► Charge the battery.
► Install the adapter/ball needle and hoses
as described in this User Manual.
► Check adapter and hoses for leaks and
pressure losses.
► Check product, valves and hose connec‐
tion to be pumped up for pressures los‐
ses.
► Fully charge the battery.
► Replace battery.
English
33
Publicité
