Publicité
3 Overview
9 High-pressure hose
The high-pressure hose connects the com‐
pressor to the adapter, the ball needle or the
tire valve.
10 Adapter
The adapter connects the high-pressure hose
to the valve of toys or sports equipment.
11 Adapter
The adapter connects the high-pressure hose
to the valve of bicycle tires.
12 Ball needle
The ball needle connects the high-pressure
hose to the valve of balls.
13 Delivery hose
The delivery hose connects the compressor
with the product to be pumped up or down.
14 Packaging
The packaging is used for storing and trans‐
porting the compressor. In the set (consisting
of compressor, battery and charger) the pack‐
aging is used for storing and transporting the
compressor, the battery and the charger.
15 Battery
The battery supplies power to the compres‐
sor.
16 Locking hook
Holds the battery in the battery compartment.
17 Charger
The charger charges the battery.
18 LED
The LED indicates the status of the charger.
19 Connecting cable
The connecting cable connects the charger to
the mains plug.
20 Mains plug
The mains plug connects the connecting
cable with a socket.
# Rating plate with machine number
3.2
Control Panel
7
6
5
4
3
2
1
0458-057-9601-A
1 Pushbutton
The pushbutton switches the compressor on
and off.
2 Pushbutton
The pushbutton starts and stops the com‐
pressor.
3 Pushbutton -
The pushbutton reduces the target pressure.
4 Pushbutton MODE
The pushbutton is used to switch between
high-pressure mode and blowing and suction
mode.
5 Display
The display shows the blowing and suction
mode.
6 Display
The display shows the high-pressure mode.
7 Display
The display shows the state of charge of the
battery.
8 Target pressure display
The display shows the target pressure.
9 Measurement pressure display
The display shows the pressure on the high-
pressure hose.
10 Unit display
The display shows the unit (BAR, PSI, KPA).
11 Pushbutton UNIT
The pushbutton is used to set the unit (BAR,
PSI, KPA).
12 Pushbutton
The pushbutton switches the lamp on and off.
13 Pushbutton +
The pushbutton increases the target pres‐
sure.
3.3
Meaning of symbols that may be on the com‐
pressor, the battery and the charger:
8
9
10
11
12
13
Symbols
The LED lights up or flashes green.
The battery is charging.
The LED flashes red. There is no elec‐
trical contact between the battery and
the charger or there is a fault in the
battery or in the charger.
The information next to the symbol indi‐
cates the energy content of the battery
according to the cell manufacturer's specifi‐
English
21
Publicité
