Publicité
7 Removing and Fitting the Battery
► Insert the mains plug (5) in a convenient wall
outlet (6).
The charger (2) runs a self test. The LED (3)
glows green for about 1 second and then red
for about 1 second.
► Fit the connecting cable (4).
► Insert the battery (1) in the guides in the
charger (2) and press it home as far as stop.
The LED (3) glows or flashes green. The bat‐
tery (1) is being charged.
► When the LED (3) stops glowing: The battery
(1) is fully charged and can be taken out of the
charger (2).
► If the charger (2) is no longer being used: Dis‐
connect the mains plug (5) from the socket (6).
6.3
Displaying the state of charge
► Insert the battery.
► Switch on the compressor.
► If the left light bar flashes green: Charge bat‐
tery.
6.4
LED on Charger
The LED indicates the operating status of the
charger or faults. The LED can glow or flash
green or red.
If the LED glows or flashes green, the battery is
being charged.
► If the LED glows or flashes red: Troubleshoot‐
ing,
16.
There is a malfunction in charger or battery.
0458-057-9601-A
75-100%
50-75%
25-50%
0-25%
7
Removing and Fitting the
Battery
7.1
Inserting the Battery
► Push the battery (1) into the battery compart‐
ment (2) as far as stop.
The battery (1) engages in position with a
click.
7.2
Removing the Battery
► Depress both locking hooks (1).
The battery (2) is now unlocked and can be
removed.
► If the battery (2) is tilted: Press battery (2)
downward slightly.
8
Switching the compressor
on and off
8.1
Switching on the compressor
► Press the pushbutton (1).
The display on the control panel switches on,
and the compressor is ready for use.
English
2
1
2
1
1
29
Publicité
