Publicité
~ ~..... --
.-.~..._._.=J=J
~
To turn the power on
Press one of the function buttons (TAPE/DECK 1/2, TUNER/
BAND, VIDEO/AUX/5.1 CH, CD, MD). Playback of the inserted
disc or tape begins, or the previously tuned station is received
(Direct Play Function).
POWER is also available,
m
When the power is turned on, the disc compartment may open
and close to reset the unit.
To turn the power off
Press POWER.
Flash Window
The inside of both cassette holders are lit up upon powering up.
The light turns off when you hold down TAPE and press ,.
Repeat the process to turn the light back on.
To change the brightness
level of the display
1 Press ECO so that "ECO MODE" is displayed.
2 Within 4 seconds, turn MULTI JOG to display "DIM MODE",
and then press ENTER within 4 seconds.
3 Within 4 seconds, turn MULTI JOG to select the dimmer mode
as below.
The mode will be automatically set after 4 seconds. It will also
be set if ENTER is pressed within 4 seconds after step 3.
~DIM-OFF
*DIMMER
1 *Dl
MM ER2~Dl
MMER3
7
DIM-OFF: The normal display.
DIMMER 1: The illumination of the display is dimmer than
usual,
DIMMER 2: The illumination of the display is dimmer than
DIMMER 1,
DIMMER 3: The illumination of the display is dimmer than
DIMMER 2, and the front panel blacks out.
m
If the timer recording (page 29) is done with the economizing
mode (page7) set to "ON" and the power turns off, the dimmer
mode
will
be set to "DIMMER 3" the next time the power is
turned on.
SETTING POWER ECONOMIZING
MODE
!Setting this unit to power economizing mode reduces power
consumption as follows.
II When the power is turned off, all the display lights turn off.
However, if the clock is not set, the game Demo (page 8) will
begin when the power is turned off.
~,If CD, Tape or Rhythm play function (page 9) does not play for
10 minutes or if there is no audio input from any connected
external equipment for 10 minutes when VI DEO/AUX/5.l CH or
MD is selected as the source, the power shuts off.
u When the power turns on due to timer recording (page 29), the
display brightness level is set to "DIMMER 3" (page 7), all button
lamps are off, and the volume is set to the minimum level (0).
II The display brightens only when operating the
Unit.
When the
unit has not been used for 10 seconds, the brightness level
switches to the mode previously selected in "DIM MODE". (Page
7)
(If the display brightness
level is set to "DIM-OFF",
the
brightness does not change. When the level is "DIMMER 3",
the button lamps are also turned off.)
1
,2
,3
Press ECO.
"ECO MODE" will be displayed.
Press ENTER within
4
seconds.
The current power-economizing mode status will be displayed.
If the power-economizing mode is OFF: ECO OFF
If the power-economizing mode is ON: ECO ON
Turn MULTI JOG within 4 seconds to switch the
power-economizing
mode on or off.
Example: When "ON" is selected
The mode will be automatically set after 4 seconds. It will also
be set if ENTER is pressed within 4 seconds after step 3.
m
Toviewthe
clock when all the display Iightsturn off, press CLOCK
so that the time is displayed for 4 seconds.
ENGLISH
7
Publicité
