Publicité
1
'W---1-------I-----------T--J
1
Deck 1
Deck 2
REV MODE
(DECK 2)
+b
EJECT
On deck 1, tapes are always played back on both sides.
CM deck 2, you can select a reverse mode to play back one or
both sides.
Use Type I (normal), Type
II
(high/CrOz) or Type lV (metal}
tapes for playback.
7
Press TAPE/12ECK 1/2 and press A PUSH EJECT
to open the cassette holder.
Insert a tape with the exposed side down. Push the cassette
holder to close,
2 Press <P
to start play.
The tape counter indicates the
Flaying deck number
tape running length.
Playback side indicator
-:
The front side is being played (forward).
<: The back side is being played (reverse).
To select a reverse mode (deck 2 only)
Each time REV MODE (DECK 2) is pressed, the reverse mode
changes.
To play one side only, select Z.
To play from front side to reverse side once only, select =>.
To play both sides repeatedly, select C=>.
When tapes are loaded in both decks, => on the display
indicates Continuous Play.
To select a playing deck
When tapes are loaded in both decks, press TAPE/DECK 1/2
first to select a deck.
The selected deck number is displayed.
To
stop play, press
.
To pause play (deck 2 only), press II. To resume plaY, Press
again.
To change the playback side, press+>
in play or pause mode.
To fast forward or rewind, press<
or >.
Then press 1 to
stop the tape.
To start
play when the power is off (Direct Play Function)
Press TAPE/DECK 1/2. The power is turned on and play of the
inserted tape begins.
To set the tape counter to 0000
Press
CLEAR in stop mode.
The counter is also set to 0000 when the cassette holder is
opened and closed.
'16
ENGLISH
Publicité
