Télécharger Imprimer la page

Aiwa NSX-MA845 Mode D'emploi page 10

Chaine stereo avec lecteur de disques compacts

Publicité

To adjust the tempo of the rhythm pattern
Using the AUTO mode
RHYTHM
MULTI
BEAT
ONIOFF
JOG
1 Press RHYTHM repeatedly until the display reads
"Tempo XXX."
m
If "AUTO" shows while you are pressing RHYTHM, change it to
"MANUAL' by turning MULTI JOG to the left. In AUTO mode the
tempo is automatically set and you cannot access the display of
"Tempo." (More about AUTO mode later.)
2 Turn MULTI JOG.
Turning to the right speeds up the tempo. Turning to the left slows
down the tempo,
(If a time-out occurs before you turn the dial, go back to the
display of "Tempo" by pressing RHYTHM. )
The tempo can be changed within the limits of 81 to 160.
m
The tempo of GAME is not adjustable.
To change the volume level of the rhythm pattern
1 Press RHYTHM repeatedly until the display reads
"LEVEL X."
2 Turn MULTI JOG.
Three levels, 1-3, are available.
To stop the BEAT function
Press BEAT ON/OFF.
BEAT toggles between On and Off
The AUTO mode automatically adjusts the tempo of the current
rhythm pattern so it coincides with the tempo of the music.
Depending on the music the AUTO mode may not work correctly
(with songs whose tempo is fuzzy, or is varying, for example).
,
II
'!
1
/
I
) _._.
.. _._-..
. . . -. .- . -—--------
.,,
2,4
1
You can let the music start playing before performing step 1 or
later at the desired moment.
1
2
3
4
Press BEAT ON/OFF to switch the function on.
You will hear the current rhythm pattern.
Change the rhythm pattern and the level setting
as required
by pressing
RHYTHM
and turning
MULTI JOG.
Press RHYTHM
to switch the display
to read
"MANUAL" or "AUTO."
Turn MULTI JOG to the right to change the display
to "AUTO."
If "AUTO"is displayed in step 3, turn MULTI JOG to the left to
change the display to "MANUAL" before performing step 4.
On switching from MANUAL over to AUTO the level of the
rhythm pattern is automatically reduced to"1 ."The preset level
will be resumed when the unit takes on the tempo of the music.
While the unit is trying to get synced up to the tempo of the
music, a cascade-like blue indicator will flash on the sides of
the graphic equalizer display section,
When you interrupt or stop the playback of the sound source,
the BEAT function is automatically switched off.
10
ENGLISH

Publicité

loading