Publicité
Remote control signal sensor
/
s
Kv
/9A-
--31
,
,
-
6;
■
«'7
1
_
/
\
.. . . _
Concerning the remote control
A
Battery installation
Use of batteries
• Align the poles (+ and -) properly when inserting the batteries.
Press in and down towards the minus end.
• Do not mix old and new batteries or different types of batteries.
• Do not recharge ordinary dry cell batteries.
• Do not heat or disassemble the batteries. Do not allow them to
contact flame or water.
• Remove the batteries if the unit is not to be used for a long time.
• Do not keep together with metallic objects such as necklaces.
• Do not use rechargeable type batteries.
• Do not use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with
any part of your body.
B
Correct method of use
Operation notes
• Do not place obstacles between the remote control signal
sensor and remote control unit.
• Do not expose the remote control signal sensor to direct
sunlight or to the bright light of a fluorescent light.
• Take care to keep the remote control signal sensor and end of
the remote control unit free from dust.
• If the unit is installed in a rack with glass doors, the glass doors'
thickness or color might make it necessary to use the remote
control a shorter distance from the unit.
To prevent damage
• Never place heavy items on top of the unit.
• Do not disassemble or reconstruct the unit.
• Do not spill water or other liquids into the unit.
How to open the remote control
Transmission
window
(§><§> ®fT]
AiiuOjS'jSlJ
About 7 meters (23 feet) in
front of the signal sensor.
(The actual range will depend
on the angle at which the
remote control is used.)
RQT5512
Publicité
