Publicité
FM MODE
VGCA
INPUT SELECTOR
Selected band
vTUNING^
The radio
Sequential tuning
Use the tuning buttons to tune-in radio stations.
1
Turn [INPUT SELECTOR] to select
"TUNER".
2
Press [BAND] to select "FM" or "AM".
3
Press [TUNING (v or A)] to tune to
the desired frequency.
Tuning interval FM: 0.2 MHz
AM; 10 kHz
TUNED" lights up when tuned.
"STEREO" lights up when an FM stereo broadcast is
received.
To make an automatic search for stations
Hold down [TUNING (V or A)] until the frequency begins
to scroll. Tuning stops when a station is found. (Tuning may
stop if there is interference.)
If noise is excessive in the FM stereo mode
Press [FM MODE].
("STEREO" will go out, and "MONO" will light up).
The broadcast will be monaural, but noise will be reduced.
If the button is pressed once more, the stereo mode resumes.
If there is hissing or thumping while the radio is
playing
Turn VGCA on.
This turns DSP off and can improve sound.
(^ Page 27 for details about VGCA.)
For your reference
The tuner can pick up interference from DVD players. If this
occurs turn the DVD player off.
Publicité
