Publicité
Switching DVD analog input
I
Use analog input to enjoy the high-quality, 96 kHz or 192 kHz
linear PCM and multiple channel linear PCM audio found on some
DVD-Video and DVD-Audio.
Select the analog input mode to suit the source.
DVD; For two-channel audio. Use the bi-amp to enhance your
audio experience
page 24).
DVD 6CH; For multiple channel audio.
1
Turn [INPUT SELECTOR] to select
"DVD".
2
Press [DVD 6CH INPUT].
The mode changes each time you press the button.
DVD6CHn;DVD
If you press this button while another source {CD, PHONO,
etc.) is selected, the receiver switches the source to DVD
and engages the DVD 6CH INPUT mode.
3
start the desired source.
Follow your equipment's operating instructions.
• If you select SPEAKERS B or turn the speakers off, DVD 6CH
switches to DVD and the STEREO DSP sound mode turns on.
The mode is restored when you turn SPEAKERS B off or turn
SPEAKERS A or Bl-WIRE on.
• You cannot select DSP sound modes while in the DVD 6CH
INPUT mode.
• BI-AMP and DVD 6CH INPUT cannot be used at the same
time.
If you are using Bt-AMP and you select DVD 6CH INPUT, BI¬
AMP will turn off and the "Bl-AMP" indicator will go out.
• Any speaker settings you have made
pages 17 and 18) are
ineffective in the DVD 6CH INPUT mode. If you need to change
speaker settings , make the settings on the other unit.
26
RQT5512
_i
Publicité
