Publicité
Preparatory steps
1
2
3
.®
3
-©
3
-®
/_ /_
/
/
I n 11
II
/
/
I
i y 11
I
i_i i_i I
I
i_ I n \ 1
1
r
f
Speaker settings
These settings should be done to get the most from the unit's DSP
reproduction modes
pages 20-21).
In SIZE
I
Set the type (LARGE or SMALL) and presence (NONE, YES or
j
NO) of your speakers. Select "LARGE" if the speakers can
j
produce bass (below around 100 Hz). Select "SMALL" if the
I
speakers cannot produce bass. Select "NONE" if center and
surround speakers aren't connected. Select "NO" if a subwoofer
isn't connected. The sound for those speakers is then produced
j
through the front speakers.
In DISTANCE
Enter the distance of the front, center and surround speakers from
the listening position so the sound from the speakers reaches the
listening position at the same time. The unit calculates the delay
time for the center and surround speakers based on these
]
distances.
In FILTER
Enter the cutoff frequency for your subwoofer based on the bass
capability of your front speakers
1
2
3
Press [POWER, 6/1]-
Press [A] and [B] at the same time.
"SETTING" appears on the display.
To set "SIZE"
@ Press [A] to select "SIZE".
Each time you press the button, the display switches as
follows.
SIZE -► DISTANCE -► FILTER-- OR COMP
{
_I
d) Press [B] to select the speaker
channel to be set.
Each time you press the button, the display switches as
follows.
FRONT-►CENTER-►SURROUND-►SUB-WFR
I
I
SUB-WFR=SUBWOOFER
(D
Turn [INPUT SELECTOR] to set the
type (LARGE, SMALL) and
presence (NONE, YES or NO) of the
speaker.
Each time you turn the selector, the display switches as
follows.
FRONT:
SMALLrz; LARGE
CENTER, SURROUND:
NONE^Zi;:SMALLrz; LARGE
SUBWOOFER:
NO^YES
The factory settings are as follows.
Front, center and surround speakers:
LARGE
Subwoofer;
YES
I
@ Repeat steps (2) and
(D
to
complete the size settings for all
speakers.
(Continued on next page)
17
ROT5512
Publicité
