Publicité
1
2 5
34
— SPEAKEBS—\
.Q
J
PHONO-* TUNER — CD -* DVD
t
I
TAPE — VCR 2 — VCR 1 — TV
DIGITAL INPUT
//
/
/
/
//
/
/ I
/
/
/_/ /
/
/ //
Enjoying the sounds
Preparation: Set [VOLUME] to the "MIN" position.
1
Press [POWER,
(+)/l].
2
Select the speaker system(s) to be
used.
A, B and BI-WlRE refer to the speaker terminals on the rear
of the unit.
BI-WIRE and A, or Bt-WIRE and B cannot be used at the
same time.
"SURROUND" and "SFC" cannot be turned on if [B] is
selected.
If you press the button once more, the indicator will switch
off and no sound will be heard from the speakers.
3
Turn [INPUT SELECTOR] to select the
desired source.
(Refer to the appropriate operating instructions for details.)
Each time you turn the selector, the display changes.
Note
Turn on the TV and select the input mode to suit the source
(e.g. TV, VIDEO).
^
(only if you select TV, CD or DVD in the above step)
Press [DIGITAL INPUT] to select the
desired input mode.
Each time you press the button, the display switches as
follows.
DIGiTAL:!z:; ANALOG
The "DIGITAL" indicator lights when "DIGITAL" is selected.
5
Press [DSP SOUND MODE] to select
the desired mode.
The SOUND MODE indicator corresponding to the selected
mode lights and that mode is displayed.
Note
• Be sure to select the mode appropriate to the source you
are playing (■► pages 20-21).
• Dolby Digital and DTS sources cannot be played with the
SFC modes.
(Continued on next page)
DSP
SOUND MODE
/_ I I
I If I n I u
n
11
\ / I I f i_i f V ±t
- PROGRAM FORMAT ~
CO
SOUKOUOOE --
^surround)
Publicité
