Publicité
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Blade diameter
Hole (arbor) diameter
Max. miter angle
Max. bevel angle
No load speed
Laser type
Dimensions (L x W x H)
Rated voltage
Net weight
Max. Cutting capacities (H x W) with blade 165 mm
45° (left and right)
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications and battery cartridge may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Wear eye protection.
To avoid injury from flying debris, keep
holding the saw head down, after making
cuts, until the blade has come to a com-
plete stop.
Miter angle
0°
Left 45° (46° when using release lever),
Right 45° (46° when using release lever)
Red Laser 650 nm, Maximum output
340 mm x 400 mm x 440 mm
45° (left)
30 mm x 92 mm
30 mm x 65 mm
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
12 ENGLISH
DLS600
165 mm
20 mm
Left 52°, Right 52°
-1
5,000 min
1.6mW ( Laser Class
2M )
D.C. 18 V
6.3 - 6.6 kg
Bevel angle
0°
46 mm x 92 mm
15 mm x 92 mm
46 mm x 65 mm
15 mm x 65 mm
DC18SH / DC18WC
Do not place hand or fingers close to the
blade.
Never look into the laser beam. Direct laser
beam may injure your eyes.
45° (right)
Publicité
