Publicité
1. Rinse Aid
To change the Rinse Aid level, follow the "Menu
Settings." r:4 is the default dosage level.
2. Chime Level
To change the Chime Level, follow the "Menu
Settings". "b:3" level is the highest chime level.
''b:0'' level means chime is off
3. Start Cycle
To change the start cycle selection, follow the
"Menu Settings". In "LP0" level, machine turns on
with Normal cycle. In "LP1" level, machine turns
on with last selected cycle and option.
4. Save Power Mode
To change the save power mode setting, follow
the "Menu Settings". In "SP0" level, interior lights
(if available) will always be off, the screen will
turn off after 4 minutes and the machine will
turn off after 15 minutes of no activity in order
to save energy.
In "SP1" level, interior lights will turn off after
4 minutes when the door is opened, the screen
will turn off after 4 minutes and the machine will
turn off after 15 minutes of no activity in order
to save energy.
In "SP2" level, when the machine is off, interior
lights will turn off after 4 minutes when the door
is opened. When the machine is on, interior
lights is on as long as the door stays open and
machine will not turn off except by pressing On/
off button.
5. Factory Setting
To change the factory setting, follow the
"Menu Settings". If you change the level as
"FS1" in factory setting, all settings return to
default setting.
LED Cycle Indicator
LED Cycle Indicator that is positioned on the
bottom side of the dishwasher shines a light
on to floor to indicate the current status of the
dishwasher during washing.
LED Indicator
Red, continuous
Red, flashing
Red, flashing rapidly
Green, continuous
Interior Light (Models 1468# and 1469#)
Provides lighting inside the dishwasher.
USA - CAN - 28
State of the Machine
The machine is running a cycle.
A cycle is cancelled.
The machine has a fault. Refer to
section "Automatic fault warnings
and what to do".
A cycle is finished.
Publicité
