EdilKamin ARIS 8 Installation, Usage Et Maintenance page 41

fi g. 12
G
I
G
*
fi g. 13
fi g. 14
INSTALLATION
B
A
A
*
*
H
B
A
FUME DISCHARGE
(CERAMIC VERSION)
The CERAMIC version of ARIS is confi gured for connecting
the fume discharge pipe to the rear and to the top.
WHATEVER SOLUTION IS USED TO CONNECT THE
FUME OUTLET TO THE FLUE, IT IS NECESSARY TO
REMOVE THE LEFT-HAND REAR METAL SIDE (A -
Fig. 12-14) AND THE LEFT-HAND METAL FRAME (B
- Fig. 12-14).
NB: add silicone (provided) between the fume volute inlet and
the elbow union provided (for fume discharge from top), or to
the pipe section provided (for fume discharge from rear).
FUME DISCHARGE FROM REAR
Remove the lower rear panel (G - Fig. 12).
Remove the pre-cut section* (Fig. 13) from the previously
removed lower rear panel (G) and from the left-hand rear metal
side (A).
Remove the pre-cut section (I - Fig. 13) from the stove struc-
ture.
Connect the fl ue section (H - Fig. 13, provided) onto the fume
volute inlet using the clamp provided.
FUME DISCHARGE FROM TOP
Mount the elbow union with clamp (L - Fig. 15) provided onto
the fume volute inlet.
Remove the cover on top (Q - Fig. 15).
Connect the fume discharge pipe (not provided) to the afore-
mentioned elbow union (Fig. 15).
Insert the rose (U - Fig. 15) provided.
AFTER CONNECTING THE FUME DISCHARGE PIPE
TO THE FLUE, RE-ATTACH THE LEFT-HAND REAR
METAL SIDE (A) AND THE LEFT-HAND METAL
FRAME (B).
Q
fi g. 15
- 41
-
U
L