Publicité
the switch setting and period of use – risk of
burns and fire!
• Do not touch the professional nozzle
during use as it will heat up. Risk of fire and
burns!
• Place the hair dryer on non-flammable surfac-
es only. Risk of fire!
• Do not place the device on or near wet towels
after use. Risk of electric shock!
• Ensure that no hair can be directly sucked into
the device. Risk of fire!
Important
• Do not jam the mains cable
doors, for example.
• Untangle the mains cable
• Do not pull, twist or bend the mains cable
and do not pull or route it over/on sharp,
8
pointed objects or hot surfaces. Damaged
or tangled mains cables increase the risk of
electric shock!
Note
A slight odour initially develops after switching on
the device for the first time. This is normal and not
harmful to your health. Allow the device to run for
three to five minutes. After that you can use the de-
vice as normal.
6. USAGE
Drying the hair
> Switch on the hair dryer using the blower switch
.
6
1 Gentle air flow
2 Strong air flow
> Select the heat setting using the heat setting
switch
:
5
1 Low temperature
2 Medium temperature
3 High temperature
> Dry and/or style your hair as desired.
After each use/at each break, always switch o
the hair dryer at the blower switch
1
in drawers or
8
if it is twisted.
8
(setting 0)
6
12
> For your safety, the device switches o automati-
cally if it overheats.
> Pull the mains plug out of the socket and allow
the device to cool down.
> Before switching on again, check the air outlet
and the filter
for blockage (e.g. flu , dust and
3
hair that has been sucked in).
> Do not place the device on or near wet towels
after use.
Selecting the function
The hair dryer has a cool setting that can be select-
ed using the cold air button
Function
Description
The cold setting provides the perfect
finish for styling. It cools your hair
down and adds hold for an improved
result.
The cold setting can be activated
at any time by pressing and holding
the button
button, the device returns to the pre-
viously selected heat setting.
After use
• After each use, pull the mains plug out of the
socket.
• Allow the device to cool down.
• Do not wind the mains cable around the
device!
• Store the device in a dry place out of the reach
of children.
• The device can be hung on a hook using the
hanging eyelet
7
7. CLEANING AND MAINTE-
NANCE
1. Disconnect the mains plug and leave the device
to cool.
2. Remove and clean the guard as shown in fig-
ure
. To ensure a long service life, clean the
A
guard at regular intervals.
:
4
. Once you release the
4
.
2
Publicité
