Publicité
262 | Licenses
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
BSD-3-Clause
ARM CMSIS Cortex-M Core, v3.20
Copyright (c) 2009 - 2013 ARM LIMITED
Copyright(c) 2010 - 2013 ARM LIMITED. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
– Redistributions of source code must retain the above copyright noti-
ce, this list of conditions and the following disclaimer.
– Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the do-
cumentation and/or other materials provided with the distribution.
– Neither the name of ARM nor the names of its contributors may be
used to endorse or promote products derived from this software wi-
thout specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
None
ST Product license, vV2
COPYRIGHT 2014 STMicroelectronics
Under STMicroelectronics' intellectual property rights, the
redistribution, reproduction and use in source and binary forms of the
software or any part thereof, with or without modification, are
permitted provided that the following conditions are met:
1. Redistribution of source code (modified or not) must retain any
copyright notice, this list of conditions and the disclaimer set forth
below as items 10 and 11.
2. Redistributions in binary form, except as embedded into
microcontroller or microprocessor device manufactured by or for
STMicroelectronics or a software update for such device, must
reproduce any copyright notice provided with the binary code, this list
of conditions, and the disclaimer set forth below as items 10 and 11, in
documentation and/or other materials provided with the distribution.
3. Neither the name of STMicroelectronics nor the names of other
contributors to this software may be used to endorse or promote
products derived from this software or part thereof without specific
written permission.
4. This software or any part thereof, including modifications and/or
derivative works of this software, must be used and execute solely and
exclusively on or in combination with a microcontroller or
microprocessor device manufactured by or for STMicroelectronics.
5. No use, reproduction or redistribution of this software partially or
totally may be done in any manner that would subject this software to
any Open Source Terms. "Open Source Terms" shall mean any open
source license which requires as part of distribution of software that the
source code of such software is distributed therewith or otherwise
made available, or open source license that substantially complies with
the Open Source definition specified at www.opensource.org and any
other comparable open source license such as for example GNU
General Public License (GPL), Eclipse Public License (EPL), Apache
Software License, BSD license or MIT license.
1 609 92A 8SS | (22.05.2024)
6. STMicroelectronics has no obligation to provide any maintenance,
support or updates for the software.
7. The software is and will remain the exclusive property of
STMicroelectronics and its licensors. The recipient will not take any
action that jeopardizes STMicroelectronics and its licensors' proprietary
rights or acquire any rights in the software, except the limited rights
specified hereunder.
8. The recipient shall comply with all applicable laws and regulations
affecting the use of the software or any part thereof including any
applicable export control law or regulation.
9. Redistribution and use of this software or any part thereof other than
as permitted under this license is void and will automatically terminate
your rights under this license.
10. THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND
CONTRIBUTORS AS IS AND ANY EXPRESS, IMPLIED OR STATUTORY
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL
PROPERTY RIGHTS, WHICH ARE DISCLAIMED TO THE FULLEST
EXTENT PERMITTED BY LAW. IN NO EVENT SHALL
STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
11. EXCEPT AS EXPRESSLY PERMITTED HEREUNDER, NO LICENSE OR
OTHER RIGHTS, WHETHER EXPRESS OR IMPLIED, ARE GRANTED
UNDER ANY PATENT OR OTHER INTELLECTUAL PROPERTY RIGHTS OF
STMICROELECTRONICS OR ANY THIRD PARTY.
Zlib
NanoPb, v0.3.9.9
Copyright (c) 2011 Petteri Aimonen <jpa at nanopb.mail.kapsi.fi>
Copyright (c) 2011 Petteri Aimonen <jpa at nanopb.mail.kapsi.fi>
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any damages
arising from the use of this software.
Permission is granted to anyone to use this software for any purpose,
including commercial applications, and to alter it and redistribute it
freely, subject to the following restrictions:
1. The origin of this software must not be misrepresented; you must not
claim that you wrote the original software. If you use this software in a
product, an acknowledgment in the product documentation would be
appreciated but is not required.
2. Altered source versions must be plainly marked as such, and must
not be misrepresented as being the original software.
3. This notice may not be removed or altered from any source
distribution.
WARRANTY DISCLAIMER
This product contains Open Source Software components which
underlie Open Source Software Licenses. Please note that Open Source
Licenses contain disclaimer clauses.
The text of the Open Source Licenses that apply are included in this
manual under "Legal Information and Licenses".
Bosch Power Tools
Publicité
