Publicité
TAKE NOTE OF FUSE SPECIFICATIONS
The air conditioner's circuit board (PCB) is designed with a
fuse to provide overcurrent protection. The specifications of
the fuse are printed on the circuit board ,such as
T3.15Al/250VAC, T5Al/250VAC, T3.15A/250VAC, T5A/250VAC,
T20A/250VAC, T30A/250VAC,etc.
NOTE: For the units using R32 or R290 refrigerant , only the
blast-proof ceramic fuse can be used.
UV-C lamp(Applicable to the unit contains an UV-C lamp
only)
This appliance contains a UV-C lamp. Please read the follow-
ing instructions before opening the appliance.
1. Do not operate UV-C lamps outside of the appliance.
2. Appliances that are obviously damaged must not be
operated.
3. Unintended use of the appliance or damage to the
housing may result in the escape of dangerous UV-C
radiation. UV-C radiation may, even in small doses, cause
harm to the eyes and skin.
4. The appliance must be disconnected from the supply
mains before cleaning your unit or any other
maintenance.
5. UV-C barriers bearing the ultraviolet radiation hazard
symbol should not be removed.
WARNING
This appliance contains an UV emitter. Do not stare at
the light source.
WARNINGS FOR PRODUCT INSTALLATION
1. lnstallation must be performed by an authorized
dealer or specialist. Detective installation can cause
water leakage, electrical shock, or fire.
4
56
Publicité
