Publicité
Istruzioni telecomando SL3192 - art. MARK56.indd 19
Istruzioni telecomando SL3192 - art. MARK56.indd 19
Note: If you want to create a group of SL2776 battery mo-
dules that are associated with the same channel, you can
perform steps 2 and 3 on different SL2776 battery modules
and, within 10 seconds, perform step 4 only once.
Resetting stored radio channels
This procedure will cancel the storage of any radio channel
on the SL2776 battery module, including that of other re-
mote controls, and any associations with Wise HUB
1) Using the end of a paperclip, keep the button on the
back of the SL2776 battery module pressed for 15 seconds,
until the yellow LEDs turn on
2) Place the battery module back onto its base plate
3) When the LED starts flashing, the procedure is completed.
PROGRAMMING THE SL3192 REMOTE CONTROL WITH THE
SL3163 CONTROL UNIT
The remote control can manage up to 32 different chan-
nels, readable on the display. The "ALL" channel is the main
channel, to which all the channels of the connected SL3163
control units are automatically associated. The SL3163
control unit can control the blinds directly or, as a primary
control unit, a group of secondary control units and, con-
sequently, all the blinds connected to them. The SL3163
control unit can memorise up to 6 remote controls, each
having up to 6 channels.
Storing a channel
There are two ways to associate the SL3192 remote control
with an SL3163 control unit: via wall buttons or, when the
latter are not available, via the programming button on the
control unit.
19
19
14/05/24 17:46
14/05/24 17:46
Publicité
