Publicité
Istruzioni telecomando SL3192 - art. MARK56.indd 17
Istruzioni telecomando SL3192 - art. MARK56.indd 17
DATA SHEET
Remote control SL3192
Radio section
Rated frequency
Channels
Apparent radiated power
Modulation
Apparent power of harmonic products (< 4 Nw)
Alignment range
Portable remote control
With incorporated antenna (SRD class 3 according to EN 301 489-3)
Environmental conditions
Operating temperature (non-condensing)
Insulation class according to EN 60950-1
Power supply
3 alkaline batteries (1.5V) or NiMh rechargeable batteries (1.2V) format AAA
Dimensions
Remote control only
Remote control with wall mount holder
WALL MOUNT HOLDER
The remote control comes with a magnetic holder for wall
mounting and can be used directly from the holder as a wall
keypad. To install the holder:
1. Remove the protective film from the double-sided adhesive
tape
2. Carefully attach the holder onto the desired surface
Note: To change the position of the holder, it is necessary to
replace the double-sided adhesive tape.
Important: Installing the holder on mobile surfaces (door or win-
dow casement) is not advisable, as an abrupt movement could
cause the remote control to detach and fall from its seat.
Min.
Typical
Max.
433-434
32
-7
-3
FSK
< 54
AR0
0
+45
Indoor
139x
44x19
139x
44x22
U.M.
MHz
N.
dBm
dBm
°C
mm
mm
17
17
14/05/24 17:46
14/05/24 17:46
Publicité
