Publicité
18
18
Istruzioni telecomando SL3192 - art. MARK56.indd 18
Istruzioni telecomando SL3192 - art. MARK56.indd 18
OPERATING INSTRUCTIONS
Operation
To select the transmission channel, press buttons (2) or (3)
until the desired channel appears on the display (1).
The "ALL" channel is preset to operate all associated re-
ceivers simultaneously and can be selected by scrolling
through the channels using buttons (2) or (3) or, more quic-
kly, using the "ALL" button (4).
To raise or lower the blind, press button (5) or (6).
To stop the movement of the blind at any time, press the
STOP button (7).
To tilt the blind (only in case of Venetian blinds), press the
relevant buttons (8) or (9); each press of the button corre-
sponds to an approx. 15-degree rotation of the slats.
PROGRAMMING THE SL3192 REMOTE CONTROL WITH THE
SL2776 BATTERY MODULE
The remote control can manage up to 32 different chan-
nels, readable on the display. The "ALL" channel is the main
channel, to which all the channels of the connected SL2776
battery modules are automatically associated.
The SL2776 battery module can memorise up to 6 remote
controls, each having up to 6 channels.
Storing a channel
1) Select the channel you want to associate with the
SL2776 battery module on the remote control
2) Hook the SL2776 battery module to its base plate
3) Press the down button 15 times until you see the green
LED on the up arrow turn on
4) Press the " " and " " buttons simultaneously (if pairing
is successful, both arrows in the SL2776 battery module
will flash green)
14/05/24 17:46
14/05/24 17:46
Publicité
