Publicité
such as playing sport) can influence the measurement accura-
cy and cause incorrect measurements.
• Cardiovascular diseases may lead to incorrect measurements
or have a detrimental e ect on measurement accuracy.
• Do not use the device at the same time as other medical elec-
trical devices (ME equipment). This could cause the measur-
ing device to malfunction and/or an inaccurate measurement.
• Do not use the device outside of the specified storage and op-
erating conditions. This could lead to incorrect measurements.
• Only use the cu s included in delivery or described in these
instructions for use with the device. Using a di erent cu may
lead to inaccurate measurements.
• Note that when inflating the cu , the functions of the limb af-
fected may be impaired.
• Do not perform measurements more frequently than neces-
sary. Due to the restriction of blood flow, some bruising may
occur.
• Blood circulation must not be stopped for an unnecessarily
long time during the blood pressure measurement. If the de-
vice malfunctions, remove the cu from the arm.
• Place the cu on the upper arm only. Do not place the cu on
other parts of the body.
• Keep packaging material away from children. There is a risk
of su ocation.
• Keep away from children, pets and pests.
• The air line poses a risk of strangulation for small children.
• Small parts may present a choking hazard for small children if
swallowed. They should therefore always be supervised
• Do not drop, step on or shake the device.
• Do not disassemble the device as this may cause damage,
faults and malfunctions.
• Do not modify the device.
• If you have any of the following conditions, it is essential you
consult your doctor before using the device: Cardiac arrhyth-
mia, circulatory disorders, diabetes, hypotension, chills, shiv-
ering
• To rule out a di erence between sides, the measurement
should initially be taken on both arms.
• Never operate the device during maintenance work. Mainte-
nance work includes maintenance, inspection and repair.
General precautions
CAUTION
• The blood pressure monitor is made from precision and elec-
tronic components. The accuracy of the measurements and
service life of the device depend on its careful handling.
• Protect the device and its mains adapter from impacts, humid-
ity, dirt, marked temperature fluctuations and direct sunlight.
• Ensure the device is at room temperature before taking a
measurement. If the measuring device has been stored close
to the maximum or minimum storage and transport tempera-
tures and is placed in an environment with a temperature of
20 °C, it is recommended that you wait approx. 2 hours before
using the measuring device.
• Do not use the device in the vicinity of strong electromag-
netic fields and keep it away from radio systems or mobile
telephones.
• We recommend removing the batteries if the device is not go-
ing to be used for a prolonged period of time.
• Avoid any mechanical restriction, compression or bending of
the cu line.
24
Publicité
