Publicité
Replacing the Bobbin Holder
1
Insert the bobbin holder into the hook race.
2
Make sure the knob of the bobbin holder fits next to
the stopper on the race.
Knob
q
Stopper
w
3
Replace the bobbin.
Attach the needle plate, inserting the two guide pins
into the holes in the needle plate. Tighten the screw
firmly with the screwdriver.
Guide holes
e
Screw
r
Clean the machine with a soft cloth. Do not use chemical
solvent.
Store the machine in cool and dry place.
Do not store the machine in an area of high humidity,
near a radiator or in direct sunlight.
90
Publicité
