S Selecting The Af Point - Canon EOS Rebel SL2 Mode D'emploi

S Selecting the AF Point

When <8: x> or <v: Xc> mode is set, since the camera
automatically focuses on the closest subject in normal cases, it may not
always focus on your desired subject.
In any other mode, you can select one AF point to focus solely on the
subject that AF point is aimed over.
94
Press the <S> button
1
The selected AF point will be
displayed on the LCD monitor and in
the viewfinder.
Select the AF point.
2
Use the <
AF point.
To select the AF point while looking in
the viewfinder, turn the <6> dial to
switch the point lit in red.
When all the AF points light up,
automatic AF point selection will be
set. The AF point will be selected
automatically to focus on the subject.
Pressing <0> toggles the AF point
selection between the center AF point
and automatic AF point selection.
Focus on the subject.
3
Aim the selected AF point over the
subject and press the shutter button
halfway to focus.
> cross keys to select the
V
.
(9)