Setting The Image Review Time; Setting The Auto Power Off Time - Canon EOS Rebel SL2 Mode D'emploi

Handy Features

3 Setting the Image Review Time

You can change how long the image is displayed on the LCD monitor
immediately after shooting. If [Off] is set, the image will not be displayed
immediately after shooting. If [Hold] is set, the image review will be
displayed up until the [Auto power off] time has elapsed.
Note that during image review, if you operate any camera controls such
as pressing the shutter button halfway, the image review will end.

3 Setting the Auto Power Off Time

To save battery power, the camera turns off automatically after a set time
of idle operation elapses. When the camera is turned off due to auto
power off, you can turn it on again by pressing the shutter button, etc.
If [Disable] is set, either turn off the camera or press the <U>
button to turn off the LCD monitor to save battery power.
Even if [Disable] is set, the LCD monitor will turn off after the
camera is left idle for approx. 30 min. To turn on the LCD monitor
again, press the <U> button.
146
Under the [z1] tab, select [Image
review], then press <0>. Select the
desired setting, then press <0>.
Under the [52] tab, select [Auto power
off], then press <0>. Select the
desired setting, then press <0>.