Canon EOS Rebel SL2 Mode D'emploi page 67

The <A> mode makes the colors look more impressive in nature, outdoor,
and sunset scenes. If you do not obtain the desired color tones, change the
mode to a Creative Zone mode and select a Picture Style other than
<D>, then shoot again (p.103).
FAQ
The focus indicator <o> blinks and focus is not achieved.
• Aim the AF point over an area with good contrast, then press the
shutter button halfway (p.44).
• If you are too close to the subject, move away and shoot again.
• Select the AF point nearest to where you want to focus (p.94). The
default setting is Automatic selection AF.
Multiple AF points light up simultaneously.
Focus has been achieved at all those points that flash in red. You
can take the picture as long as an AF point covering the target
subject is lighting up.
A Fully Automatic Shooting (Scene Intelligent Auto)
Take the picture.
4
Press the shutter button completely to
take the picture.
The captured image will be displayed
for approx. 2 sec. on the LCD
monitor.
When you finish shooting, push down
the built-in flash with your fingers.
65