Publicité
EN
Fan power adjument
There are 9 fan speeds, which can be set by pressing the Inscrease/Decrease fan
speed buttons.
Increase button: In standby mode, press the Increase button. The buzzer will
sound once, the indicator light will be fully on for 2 seconds, and then enter a
semi-lit state. The display screen will show "1", and the motor will start running in
gear 1. Press the Increase button again, and the indicator light will be fully on for
2 seconds before entering a semi lit state. The motor gear will be increased by one
gear (the highest gear is 9th gear), and the display screen will show the corre-
sponding gear (without cycling).
Decrease button: In the power on state, press the Decrease button, the buzzer
will sound once, and the indicator light will be fully on for 2 seconds before enter-
ing a semi-lit state. The motor gear will be decreased by one gear (the lowest gear
is 0), and the display screen will show the motor gear. When the motor gear is set
to "0", the motor stops running and returns to standby mode.
30
Publicité
