Singer Futura CE-100 Manuel D'instruction page 90

IF STITCHES ARE MISSING
If the embroidery machine detects that the thread has
broken, it may continue to embroider up to about eight
stitches without any thread (blank stitches) before it
automatically stops.
In such cases, use the following procedure to step back through
the embroidering data to the point for continuing.
1. Press the reverse switch (stitch return) to step back through
the embroidering data.
The hoop will move back one stitch at a time.
Step back through the data until the blank area has been
completely passed over.
2. Restart the embroidery machine and continue embroidering.
88
Embroidering direction
Direction de broderie
Dirección de bordado
1
3
Blank stitches resulting from thread breakage
Points vide résultant d'une rupture du fil
Puntadas en blanco resultantes de ruptura de hilo
Embroidered section
Section brodée
Sección bordada
2
4
6
8
5
7
automatically stop
S'arrête automatiquement
Para automáticamente
Reverse stitch switch
Touche couture arrière
Interruptor de puntadas
hacia atrás