Ice Maker Activation (Optional); Information And Malfunction Messages On The Display - Fulgor Milano F7PBM36S1 - R Mode D'emploi

EN
The temperature shown can vary slightly in
respect to the set temperature following fre-
quent openings of the doors or insertion of
room temperature foods or large quantities
of foods.
6 to 12 hours are necessary to reach the se-
lected temperature.

4.3 Ice Maker Activation (optional)

The Ice Maker button
trol panel permits activation of the automatic ice-
maker.
The button is illuminated when the icemaker is
functioning.
A prewash of the water circuit should be perfor-
med before activating the Ice Maker for the first
time. To do this touch at the same time buttons
Enter and Ice Maker
After a few minutes the Ice Maker can be activa-
ted.
Important
Do not activate the Ice Maker unless
the appliance is connected to the water
mains.
4.4 Information and malfunction mes-
sages on the display
An integrated control system provides informa-
tion through light signals or text messages vi-
sualized on the display.
The information signal is always visualized with
a fixed text message, while a malfunction signal
is visualized with blinking text. The sound signal
that accompanies some malfunction signals can
be deactivated by pressing the Alarm button
on the main control panel.
The list of malfunction signals is located at the
back of this manual.
10
located on the main con-
.