Publicité
@ As shown in Fig. 6, gently push the lower side of the case and open its cover. Keep the removable
face plate in the case. Then you can safely take the plate with you.
@ Removable face plate case
@ Open
7
© Push
Fig. 6
To install the Removable Face Plate
@ Fit either the edge of the right or left hole in the face plate over the main unit's pins, and fit it over
on the other side while pushing it.
Fig. 7
Security indicator
@ After fitting the face plate holes, try moving the face plate up and down a few times to make sure
that it has been fitted securely.
Fig. 8
@) Close the front panel and press the right side of the face plate until a "click" is heard.
Cautions:
. Before removing the removable face plate, make sure the power is off.
. This removable face plate is not water-proof. Do not expose it to water or excessive moisture.
. Do not remove the removabie face plate, while driving your car.
. Do not place the removable face plate on the dashboard or nearby areas where the tempera-
ture rises to high leveis.
. Do not touch the contacts on the removable face plate or on the main unit, since this may re-
sult in poor electrical contacts.
. If dirt or other foreign substances get on the contacts, wipe them off with clean, dry cloth.
. Do not apply a strong downward force onto the face plate and do not put anything on it while
it is open, or it might be damaged.
|
ETES
21
CQ-DF100U
Publicité
