Publicité
Installation Guide
ÁN WARNING
The installation information is designed for experienced installers and is not
intended for non-technical. individuals. It does not contain warnings or cautions
of the potential dangers involved in attempting to install this product.
Any attempt to install this product in a motor vehicle by anyone other than a
qualified installer could cause damage to the electrical system and could result
in serious personal injury or death.
O Overview
© Installation Hardware
sional. However, if you plan to install this unit
yourself, your first Step is to decide where to in-
Mounting Collar
stall it. The
instructions
in these
pages
will
guide
you
through
the
remaining
steps:
(Please refer to the "WARNING"
statement
Hex. Nut (5 mm)
above).
Rear Suppor Strap
Pig
@ | Tapping Screw
1
(5 mmpx16 mm)
C4
Mounting Bolt (5 mm)
è Identify and label the vehicle wires.
e Connect the vehicle wires to the wires of the
power connector.
|
è Install the unit in the dash.
@ Check the operation of the unit.
If you encounter problems, please consult your `
nearest professional installer.
Caution: This unit operates with a 12 volt DC
negative ground auto battery system only. Do
not attempt to use it in any other system. Doing
© | Removable Face Plate
so could cause serious damage.
Case
a
rm
Before you begin installation, look for the items
on the right which are packed with your unit.
e Warranty Card...Fill this out promptly.
è Panasonic Servicenter for Service Directory
..Keep for future reference in case the unit
needs servicing.
e Installation Hardware...Needed for in-dash
installation.
15
CQ-DF100U
Publicité
