Publicité
Clock Basics
The 12-hour system is Used for the clock.
Initial Time
(D Press [DISP](CLOCK).
"ADJUST" appears on the display.
© Press and hold [DISP]{(CLOCK) again
for more than 2 seconds. "12" blinks,
and the time setting mode is activated.
@) Press [V TUNE] or [A TUNE] to set
the hour.
@ Press [DISP](CLOCK)
again to pro-
ceed with the minutes setting.
© Press [V TUNE] or [A TUNE] to set
the minute.
Press [V TUNE] or [A TUNE] for
more
than 0.5 seconds
to change
numbers on the display in sequence.
@) Once the time has been set, press
[DISP](CLOCK).
. 4
EF tS
Note:
The [DiSP]{(CLOCK) button will not work while the CD player or
CD changer is set to the scan play mode. Cancel the scan play
mode before pressing [DISP](CLOCK).
Time Reset
Press and hold [DISP]{CLOCK) for more than 2 seconds to acti-
vate the time setting mode to reset the time. Then, repeat steps @)
to © above.
Clock Display
Press [DISP](CLOCK) to change to the clock display as follows.
In Tuner Mode Broadcast station<— Clock
In CD Mode
Playing time
<«—» Clock
When the power is turned off while the time is displayed, the
clock mode remains on. When [DISP] is pressed, the system
is turned off completely.
Note: The power must be switched off before leaving the
car if it does not have an accessory.
14
Publicité
