Publicité
PIÈCES D'USURE
PIÈCES D'USURE
Item Denomination
Feed / pressure
A
roller
B
Gear adapter
C
Inlet nozzle
D
Drive gear
E
Intermediate nozzle 0455 072 002 Fe, Ss & cored wire
F
Outlet nozzle
G
Liner
The rollers are marked with wire dimension in mm, some are also marked with inch.
Welding with aluminium wires
In order to weld with aluminium wires, proper rollers, nozzles and liners for aluminium wires
MUST be used. It is recommended to use 3 m long welding torch for aluminium wires,
equipped with appropriate wear parts.
0463 272 001
Ordering no. Notes
0459 052 001 Ø 0.6 & 0.8 mm; Fe, Ss & cored wire; V-groove
0459 052 002 Ø 0.8 & 1.0 mm; Fe, Ss & cored wire; V-groove
0459 052 003 Ø 0.9/1.0 & 1.2 mm; Fe, Ss & cored wire;
V-groove
0459 052 013 Ø 1.4 & 1.6 mm; Fe, Ss & cored wire; V-groove
0458 825 001 Ø 0.9/1.0 & 1.2 mm; Cored wire; V-groove;
knurled
0458 825 002 Ø 1.2 & 1.4 mm; Cored wire; V-groove; knurled
0458 825 003 Ø 1.6 & 2.0 mm; Cored wire; V-groove; knurled
0458 824 001 Ø 0.8 & 0.9/1.0 mm; Al wire; U-groove
0458 824 003 Ø 1.2 & 1.6 mm; Al wire; U-groove
0459 441 880 Replacing 0455 053 880
0455 049 001
0459 440 001 Replacing 0455 052 001
0456 615 001 Al wire
0469 837 880 Ø 2.0 mm steel for 0.6-1.6 mm Fe, Ss & cored
wire
0469 837 881 Ø 2.0 mm plastic for 0.8-1.6 mm Al wire
0349 303 018 Fe, Ss & cored wire
0455 894 001 Al wire
- 27 -
© ESAB AB 2017
Publicité
