the Basement.)
•
Press the Side Key for the icon to operate the device. You can turn it on, dim, or off.
(Note: Many devices have follow-up screens, which also provide additional features
for operating the device. Use the Side Keys and Navigation buttons to operate those
features.)
QUICKPOWER FOR MARMITEK X-10 DEVICES
•
Set up an Marmitek X-10 device using the Wizard or Add-Edit mode, for example a
light in your Living Room with an LM12 module.
•
Select Home/Setup/X10/More/QuickPower Macro.
•
Select Pick Module, and select the command (s) you want to send. Try a simple
"Off" command for now, but understand that you can string many commands from
different modules and different rooms together in conjunction with delays as well.
•
Select Save and then Done.
•
Select Home/QuickPower.
•
Press the Side Key next to the Marmitek X-10 icon to trigger the Quick Power Macro.
SET UP FOR SLEEP MACRO.
•
Set up an Marmitek X-10 device using the Wizard or Add-Edit mode, for example a
light in your Living Room with an LM12 module.
•
Select Home/Setup/X10/More/Sleep Macro.
•
Select "Pick Module" and select the command (s) you want to send. Try a simple
"Off" command for now, but understand that you can string many commands from
different modules and different rooms together in conjunction with delays as well.
•
Select Save and then Done.
•
Select Home/Sleep/X10.
•
Press the Side Key to toggle when the command(s) will be sent for 15 minutes to up
to an hour and a half away from the current time.
VOICE DIALER SECURITY
The EasyIcon10RF Remote used in conjunction with the
SafeGuard/TotalGuard (SC9000) security console gives you the ability to
operate your home security directly from your remote.
Description:
To set up your remote for the SafeGuard/TotalGuard console do the fol-
lowing:
•
Press the Home key.
•
Press the Set Up Side Key.
•
Press the X-10 Side Key.
•
Press the Add/Edit Side Key.
•
Use the Side key to select the room that you want to associate the security device.
12
© MARMITEK