Publicité
If any components are missing, please contact your dealer.
Interactive Display: 1
Remote control unit: 1
Cable clamp: 3
Power cord
Remote control unit battery: 2
* Please note: do not dispose of batteries in household waste for environmental protection. Follow the disposal instructions for
your area.
Preparing the Remote Control Unit
1. Place your finger on the part marked with the ▲, and then pull the cover off.
2. See the instructions in the compartment and put in the batteries (R03 or LR03 ("AAA" size) x 2) with their plus (+)
and minus (-) sides oriented correctly.
3. Close the cover.
Caution
• Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/disconnecting
cables. Also, read the manual of the equipment to be connected.
• Be careful not to confuse the input terminal with the output terminal when connecting cables. Accidentally reversing cables
connected to the input and output terminals may cause malfunctions and the other problems.
• When connecting the power cord to the product's AC input terminal, make sure the connector is fully and firmly inserted.
6
E
Supplied Components
Setup Manual (this manual): 1
FlatFrog Board for Rooms Information: 1
Touch pen: 2
Camera mount (small): 1
Camera screw (inch thread): 1
Camera mount (large): 1
USB cable: 1
Connections
Cover SHARP logo: 1
Place this sticker onto the SHARP logo to
cover the logo.
Camera mount screw (M3x8): 2
Camera mount screw (M3x12): 2
PN-LA862/PN-LA752 only
Player mount: 1
Player mount screw (M4x6): 2
Publicité
