Publicité
Mounting Precautions (For SHARP dealers and service engineers)
• When installing, removing or moving the monitor, ensure that this is carried out by at least 4 people. (PN-LA652: at least 3
people.)
• Be sure to use a wall-mount bracket designed or designated for mounting the monitor.
• This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials
such as plaster / thin plastic board / wood before starting installation.
• This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor.
Install by the most suitable method for the material and the structure.
• To attach a VESA-compliant mounting bracket, use M8 screws that are 3/8 inch (10 mm) to 9/16 inch (15 mm) longer than the
thickness of the mounting bracket.
• Do not use an impact driver.
• When moving the monitor, be sure to hold the handles or the parts marked by
cause product damage, failure, or injury.
• After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount.
• Do not use any screw holes other than those for mounting brackets, located on the rear of the monitor, for installation.
• If you need to temporarily place the monitor on a table or other surface during installation, spread a thick soft cloth on the
table to prevent damage to the screen and table.
• When using the monitor laying flat on a surface (when the monitor is tilted more than 20 degrees upward from the
perpendicular in relation to a level surface), consult an authorized dealer because there are some specific mounting
conditions.
nAttaching player mount (PN-LA862/PN-LA752)
Attach the player mount when installing an optional controller.
PN-LA862
Player mount
1
PN-LA752
Player mount
1
3/8 - 9/16 inch (10-15 mm)
Screws (M8)
Mounting bracket
Monitor mounting
1. Remove the screws from this monitor.
2
2. Attach the player mount with the screws removed from
this monitor.
3
3. Attach the player mount with the player mount screw
(M4x6) (supplied) (x2).
2
3
below. Do not grasp the screen. This may
11
E
Publicité
