Publicité
Turning power off
When you use the option board, look at the Operation Manual.
1. Press the POWER button or MONITOR OFF button.
The power is turned off. (Standby state)
1
3
Camera mount
Mounting a web camera
It is possible to mount the PN-ZCMS1 Video-Conferencing
Soundbar (optional) or a commercially available web camera
(1.1 kg (2.4 lbs.) or less) with the camera mount (small)
(supplied).
Camera mount (small)
1. Remove the screws from this monitor.
2
2. PN-LA862/PN-LA752:
3. Attach the PN-ZCMS1 (optional) on the camera mount
Camera mount (large)
It is possible to mount our recommended web camera with the
2
camera mount (large) (supplied).
1. Remove the screws from this monitor.
2. PN-LA862/PN-LA752 :
• Fix the camera mount and the web camera firmly. Dropping
• Remove the web camera when moving this monitor.
• Store the removed screws.
• For mounting instructions of web camera (optional), refer to
POWER button /Power LED
Attach the camera mount (small) (supplied) with the
camera mount screws (M3x12) (x2) (supplied).
PN-LA652:
Attach the camera mount (small) (supplied) with the
camera mount screws (M3x8) (x2) (supplied).
The camera mount screws are different depending on the
monitor.
with the camera screw (inch thread) (x1) (supplied).
Attach the camera mount (large) (supplied) with the
camera mount screws (M3x12) (x2) (supplied).
PN-LA652:
Attach the camera mount (large) (supplied) with the
camera mount screws (M3x8) (x2) (supplied).
The camera mount screws are different depending on the
monitor.
Caution
the camera mount or the web camera may cause product
damage, failure, or injury.
TIPS
After removing the camera mount, put back the removed
screws.
the instruction manual for the web camera.
9
E
Publicité
