Télécharger Imprimer la page

Andis WDS-1 Instructions D'utilisation Et D'entretien page 6

Publicité

USING THE BIKINI COMB ATTACHMENT
1. Place back end of comb onto back of shaver, then press down to snap into place.
2. Hold the shaver at a right angle to your skin and press down gently.
3. Edge and shape the area as desired.
4. After shaving, turn the shaver OFF.
USER MAINTENANCE
If shaver is to remain unused for a long period of time, store in a safe, cool, dry
place. Do not wrap cord tightly around shaver. Do not hang the shaver by the power
cord. Other than the recommended maintenance described in this manual, no
other maintenance should be performed. To contact Andis directly, please call our
Customer Support Team at 1-800-558-9441 or email us at support@andisco.com.
CLEANING
(Refer to Figure B for this section)
Regular cleaning is necessary in order to maintain the optimal performance
and maximum comfort from your shaver.
1. Turn shaver off by switching ON/OFF switch to the OFF position.
2. Slide the foil assembly release button to the right to release the foil assembly. Lift
assembly off of shaver.
3. Use the small cleaning brush provided to gently brush away any hair that has
collected inside the shaving head. Clean all parts of the shaving head except the foil.
4. Rinse the foil assembly and cutting heads with water and allow to air dry
completely.
5. Once fully dry, place the foil assembly back on to the shaving head.
USE GUIDELINES FOR LITHIUM-ION BATTERIES
1. The lithium-ion battery included with your shaver does not develop a "memory
effect" like a nickel-metal hydride (NiMH), or nickel cadmium (NiCd) battery. You
can return the shaver to the charger at any time for a full charge, or even use
the battery before a charge cycle is complete. Like most rechargeable batteries,
lithium-ion batteries perform best when used frequently.
2. For maximum battery life, store the shaver in a partially discharged condition if it
will not be used for several months. To discharge the battery, run the shaver until it
automatically shuts off.
3. Avoid locating the shaver near heat vents, radiators, or in direct sunlight. Optimum
charging will result where the temperature is stable. Sudden increases in
temperature can result in the battery receiving less than a full charge.
6

Publicité

loading