Télécharger Imprimer la page

Andis WDS-1 Instructions D'utilisation Et D'entretien page 3

Publicité

4. Keep the cord away from heated surfaces.
5. Never drop or insert any object into any opening.
6. Do not use outdoors or operate where aerosol (spray)
products are being used or where oxygen is being
administered.
7. Do not use this appliance with a damaged or broken foil
or cutter, as injury to the skin may occur.
8. Always attach plug to appliance first, then to outlet. To
disconnect, turn all controls to OFF, then remove plug from
outlet.
9. For the purposes of recharging the battery, only use the
detachable supply unit provided with this appliance.
10. WARNING: Detach the hand-held part from the supply cord
before cleaning it in water.
11. THIS PRODUCT INTENDED FOR HOUSEHOLD USE.
Suitable for cleaning under an open water tap
Detachable supply unit
SAVE THESE INSTRUCTIONS
OPERATING INSTRUCTIONS
(Refer to Figure A for this section)
CHARGING SHAVER
The shaver has not been charged at the factory. Please charge the shaver for
a minimum of 90 minutes before the first use for maximum performance.
This battery charger is intended for use with Andis model WDS-1 lithium-ion battery
with a rated capacity of 3.7V
the carton. Plug the adapter into a 100-240V AC outlet, or according to your local
600mAh. Remove the shaver and AC adapter from
3

Publicité

loading