Publicité
USE & TIPS
Temperature setting
Control Panel
Buttons
-Key
A. Standby button
B. Temperature setting button and fridge/freezer switch button
-Temperature setting button
1: -16°C/8°C
2. -20°C/4°C
3. -24°C/2°C
4. SUPER COOL/FREEZER
5. Light on freezer
Display
• When powering on for the first time, the display will be flash for 3 seconds,
while the startup bell will ring and then the display will enter normal operation.
(The initial power-on is in freezing mode, lighting on freezer blue indicator, the
freezing setting gear is on 2. And the temperature is set to -20°C)
• Display the fault code when there is a fault (cyclic display); Display the set
temperature of the refrigeration room when there is no trouble.
• The display board is on when the refrigerating door is open and it switches off
30 seconds after the door is closed.
• If the display board is off, you may press any key to switch it on.
• Error codes :
Temperature setting
•
Each time the temperature setting button A is pressed once, the temperature setting changes one
time. After the temperature setting has been completed, the refrigerator will run according to the set
value after 15s.
Publicité
