Remote Control - NAD 517 Manuel D'installation

- The MEMORY indicator must be OFF.
2. Enter one of the following types of programs
(see PROGRAMMED DISC PLAY")
a) Various tracks on several discs
b) All of the tracks on one disc
-The MEMORY indicator lights.
3. Press the REPEAT button (10) twice.
- The ONE REPEAT indicator lights.
4. Press the PLAY button (3).
- The PLAY indicator lights
5. Press the ">>I" or I<<" button (7) to select the
programmed disc and track to be repeated.
6. The programmed track selected will play repeat-
edly until the STOP button is pressed.
7. Press the REPEAT button once more to end
repeat play.
Programmed play continues from that point.
8. When the last track has finished playing during
programmed play the CD changer will stop.
- The PLAY indicator goes OFF
- The MEMORY indicator remains ON.
NOTE:
If the STOP button is pressed, repeat play will end.

REMOTE CONTROL

The wireless, infrared Remote Control Unit can
operate the compact disc changer from a distance of
up to 30 feet. The hand-held remote control emits an
invisible infrared beam which carries the control sig-
nals to the sensor window on the front panel of the
compact disc changer. Because the infrared beam
travels in a straight line, the emitter on the remote
control must be pointed towards the infrared sensor
window on the compact disc changer. Make sure
that there are no objects between the remote control
and the compact disc changer that might obstruct the
beam. Refer to the "OPERATION OF THE DIGITAL
COMPACT DISC CHANGER" section for detail of
buttons whose function are not described in this sec-
tion. They function the same as buttons of the chang-
er.
Battery Installation
Remove the rear cover of the remote control. Install
two AA (R6 or SUM3) size batteries (included) while
observing the correct polarity (match the (+) and (-)
signs). If the batteries are installed incorrectly, the
remote control will not operate and damage may
result. Replace the rear cover.
CAUTION:
Remove the batteries from the remote control if is
not to be used for a long period of time. Exhausted
batteries may leak and damage the remote control.
The Remote Control unit allows extra functions to
be selected in addition to those controls on the front
panel of the player.
Direct Access to a Track
1. Select a disc number using the DISC NO. button.
2. Select a track number using the TRACK NO.
buttons and then press the PLAY button.
NOTE: Track numbers can be designated from "1"
to "99". When the track number which is not con-
tained in a disc is designated, the last track of the
disc will be played.
Entering A Program
A track number can be entered easily into a pro-
gram by using the TRACK NO. buttons instead of the
MUSIC SKIP buttons.
- When all the programmed tracks are played
through, the player will be set to the programmed
playback stop mode.
- When one of the MUSIC SKIP buttons is pressed
during the random programmed disc play, the track
number will change in the order in which they have
been programmed.
Shuffle Play
1. Press the SHUFFLE button either on the player
or on the remote control.
- The SHUFFLE indicator will light.
2. Press the PLAY button.
- The PLAY indicator will light and shuffle play will
begin.
- When the SHUFFLE button and PLAY button are
pressed during the STOP mode, the CD changer's
built-in micro computer will select and play disc tracks
at random, until the STOP button is pressed. If tracks
have been programmed, the programmed tracks will
be played at random.
- When the PLAY button is pressed, shuffle play
will end and normal (or programmed) disc play will
continue from that point. If a new track number is
selected during normal shuffle (not programmed)
play will end and normal disc play will continue from
that point.
- If a new track number is selected during the shuf-
fle play of programmed tracks and the PLAY button is
pressed, the new track number will be ignored, shuf-
fle play will be cancelled but programmed disc play
will continue as before.
Shuffle Programmed Disc Play
1. Enter the program.
2. Press the SHUFFLE button.
3. Press the PLAY button.
NOTE:
- If all the tracks on a disc have been entered as
one selection in a program the shuffle play function
will select and play one track, and then move on to
another disc.
- When all of the shuffle programmed tracks have
been played, the CD changer will stop.
- Pressing the ">>I" or I<<" button during the shuffle
programmed play changes track numbers in the pro-
grammed order.
PREVIEW DISC PLAY
Checking the Contents of All Discs
Press the PREVIEW button and PLAY button to
start intro check disc play. The INTRO and PLAY
indicators will light.
GB
NAD
7