Publicité
ATTENTION - IMPORTANT
ES
1. Proceed with caution. Fully read the instructions before starting the
installation.
2. WARNING! This fan can only be used with a bipolar switch with a
contact opening of 3 mm respectively.
PT
3. The installation process must only be carried out by a licensed
electrician.
4. The mounting height, meaning the distance between the blades and
the floor, must be at least 2.3 meters.
EN
5. Ensure that there are no obstacles within the rotation field.
6. Make sure the fan is securely fastened to the ceiling.
7. WARNING! Do not use a switch with a voltage regulator to control
FR
the fan speed.
8. WARNING! To avoid damage, ensure that the blades are not bent and
that no foreign objects are in the rotation field.
9. WARNING! If the fan is installed close to the ceiling, it cannot be
rehung using suspension rods in accordance with European safety
regulations. This could cause serious injuries. If you have any doubts
regarding these essential safety requirements, consult local ordinances.
10. Keep electronic devices out of the reach of children or disabled
persons. Do not allow them to handle these devices without supervision.
11. Suitable for use in enclosed spaces.
12. Ensure the device is not connected to the power supply before
dismantling lamp components. Electrical power should only be supplied
once the installation is complete.
13. Do not remove the lamp cover while the bulb is on.
Only replace the bulb once the lamp has cooled down and the device is
14. disconnected from the power supply.
15. When operating the device, ensure the lamp cover is properly
secured.
16. Always maintain the distance indicated in the image between the
lamp and flammable materials (curtains, walls, etc.).
17. IP20: The fan is designed for indoor use only. It is not suitable for
installation in bathrooms or primarily humid areas. Ensure the lamp
never comes into contact with water.
18. Ensure children do not play with this lamp. Power off before
installation, bulb replacement, maintenance, and cleaning.
19. This device can be used by children aged 8 years and above, and
by individuals with reduced physical, sensory, or mental capabilities, or
lack of experience and knowledge, if they have been given appropriate
supervision or training regarding safe use of the device and understand
the hazards involved. Children must not play with the device. Cleaning
and maintenance by the user must not be carried out by unsupervised
children.
20. The power disconnection mechanism has a separation between all
plug contacts that provides full disconnection and must be incorporated
Instruction manual
into the fixed wiring in accordance with wiring regulations.
21. See the "INSTALLATION" section for details on how to secure and
install the fan.
22. Refer to the "WIRE INFORMATION" section for instructions on
connecting the cable.
23. Instructions on bulb replacement, including the model and reference
of the lamp. Refer to the "Bulb Replacement" section.
SYMBOLS DESCRIPTION
You can find all the symbols related to this lamp on both the product
label and the packaging box.
Class I Insulation
wire (green and yellow) to the ground conductor.
Class II Insulation
be connected to the grounding.
current.
the lamp and any flammable object in meters.
without glass. If it gets damaged, replace it with a new one.
exclusively.
on the lamp's label..
flammable surfaces.
COMMISSIONING
1. Initial Connection and Verification: Connect the device to
the power supply and check that the fan operates correctly.
REMOTE CONTROL
▶The appropriate speed will depend on factors like room size, ceiling
. This fan must be connected with its grounding
. This fan has double insulation and should not
CA - Alternating Current Voltage: Indicates the use of alternating
Frequency (Hz): The operating frequency of the fan.
Voltage (V): Specifies the operating voltage in volts.
Power Rating (W): Indicates the power consumption in watts.
Minimum Distance: Specifies the minimum distance between
Glass Requirement: The lamp should not be used
LED Bulbs Only: The lamp is designed to work with LED bulbs
Indoor Use Only: The lamp is intended for indoor spaces.
Protection Rating: The corresponding protection rating can be found
Flammability: The luminaire must not be installed on normally
• ON/OFF: turns the light on and off.
• 0: turns teh fan off.
•
: Speed 3 - máx. speed.
•
: Speed 2 - medium speed.
•
: Speed 1 - min. speed.
height, and the number of fans in the area.
Ref. 33807
Publicité
